In the process of basing a few bits of pipe terrain it became obvious that a toxic waste pool was required. Initially I was tempted to get one of the proper pour-it-out-water-scenery offerings but, partly because I didn't want to spend money and partly because I couldn't be bothered to go to the shops, I thought I'd try just using PVA glue.
But I ran out...
So instead I hunted around the garage for a suitable alternative and came up with some UniBond wood glue. It's fairly thick stuff so I didn't end up with it pouring through all the unfilled gaps at the bottom of the pool. Also it dries a really nasty yellow! To be honest it looks like toxic waste even without painting.
No comments:
Post a Comment